A&V Waterjet Machine Maintanance Knowledgebase

A&V Waterjet Parts Manual v1.7 May 2017
v1.7  update some parts numbers
Tue, 16 May, 2017 at 3:28 PM
Z- axis Height Adjustment Instruction
Z- axis Height Adjustment Instruction          Problem description  If after installation, the cutting head cannot be moved to a proper...
Thu, 13 Oct, 2016 at 8:41 AM
Maintaining your waterjet
Maintaining your waterjet     Modern equipment is easier to maintain than even just a few years ago, and also requires much less maintena...
Sun, 8 Mar, 2015 at 4:07 PM
A&V Waterjet High Pressure Tube Replacement Tip
High Pressure Tube Replacement Instruction    Problem description  When changing HP (High Pressure) tubes, due to the differences between tube m...
Tue, 7 Apr, 2015 at 8:15 PM
A&V Waterjet Pump common failures trouble shooting guide
Symptoms Cause/Solution            Waterjet machine has low pressure while the intensifier shifts normally 1. Check if there is any leaki...
Mon, 4 Nov, 2019 at 3:46 PM
A&V Waterjet Warranty for cutting table & controller
Warranty for cutting table & controller The product provides the warranty period of one year or 1,000 hours of work. If one of the items first...
Thu, 2 Apr, 2015 at 9:21 PM
A&V PUMP - Warranty and notice of defects for pump
The supplier shall be liable for defects as follows:   1. All parts or services that exhibit a defect within the period of limitation- without rega...
Mon, 9 Mar, 2015 at 10:19 PM
Waterjet CNC cutting table trouble shooting
Waterjet CNC cutting table trouble shooting Symptom Possible Causes Solution   Cannot open control software Waterjet control software Er...
Wed, 11 Jan, 2017 at 9:35 AM
A&V Waterjet Hydraulic oil used for High Pressure Pump - NO. 46 anti-wear hydraulic oil
Thu, 2 Apr, 2015 at 9:22 PM
A&V Waterjet ballscrews periodically cleaning!
1.      1. For Y1 and Y2 axes (or Y axis for 6*3 machine) and X axis, unscrew the axis cover(s) from the cutting table like shown in the picture.   ...
Sat, 4 Apr, 2015 at 10:00 AM